Update error from 1.16.1 to 1.17.0

armanguard

I am trying to update my omnileads onpremise instance from 1.16.1 to 1.17.0.
All the changes are done as it is mentioned in the https://documentacion-omnileads.readthedocs.io/es/1.16.1/maintance.html but it fails with below errors

""*** [OMniLeads] Creating the installation process log file.
*** [OMniLeads] Getting release data.
fatal: ambiguous argument 'HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
""

please help this is urgent !!!!!

FernandoMontiel

Dear @Shant, hi!

Did you run these steps, as mentioned on documentation, after "git checkout release-1.17.0"?

git submodule init
git submodule update --remote

Can you please send us, the complete procedure you followed?: History, the complete execution of the script deploy.sh, from the start to the final error, including the directory where you are when the script is executed.

Let me know.

Best regards.

armanguard

Dear FernandoMontiel , Hi !
please note everything is done as per the guide and you can find the screenshot attached![here.!
Also please be advised, localhost ansible_connection is uncommented and extern_ip is set to auto.

FernandoMontiel

Hi @Shant.

I think your git directory is broken (/usr/src/ominicontacto), but I don't know why because I don't know the commands you executed before.

Anyway, we can start over, cloning the repo again. So, please proceed as follows:

1) Perform a backup of your original repo, in case you have personal data there:

[root@CentOS7-Fresh ~]# cd /usr/src/
[root@CentOS7-Fresh src]# ls
debug  kernels  ominicontacto
[root@CentOS7-Fresh src]# mv ominicontacto/ ominicontacto.bkp.20210820
[root@CentOS7-Fresh src]# ls
debug  kernels  ominicontacto.bkp.20210820

2) Clone the repo again, on branch release-1.17.0, on the same directory (/usr/src):

[root@CentOS7-Fresh src]# pwd
/usr/src
[root@CentOS7-Fresh src]# git clone --recurse-submodules --branch release-1.17.0 https://gitlab.com/omnileads/ominicontacto.git
Cloning into 'ominicontacto'...
remote: Enumerating objects: 52995, done.
remote: Counting objects: 100% (9058/9058), done.
remote: Compressing objects: 100% (1494/1494), done.
remote: Total 52995 (delta 8532), reused 7684 (delta 7539), pack-reused 43937
Receiving objects: 100% (52995/52995), 100.32 MiB | 6.21 MiB/s, done.
Resolving deltas: 100% (37270/37270), done.
Submodule 'modules/asterisk' (https://gitlab.com/omnileads/omlacd.git) registered for path 'modules/asterisk'
Submodule 'modules/kamailio' (https://gitlab.com/omnileads/omlkamailio.git) registered for path 'modules/kamailio'
Submodule 'modules/nginx' (https://gitlab.com/omnileads/omlnginx.git) registered for path 'modules/nginx'
Submodule 'modules/postgresql' (https://gitlab.com/omnileads/omlpgsql.git) registered for path 'modules/postgresql'
Submodule 'modules/redis' (https://gitlab.com/omnileads/omlredis.git) registered for path 'modules/redis'
Submodule 'modules/rtpengine' (https://gitlab.com/omnileads/omlrtpengine.git) registered for path 'modules/rtpengine'
Submodule 'modules/websockets' (https://gitlab.com/omnileads/omnileads-websockets.git) registered for path 'modules/websockets'
...
...
...

3) And finally, start over with upgrade process:

[root@CentOS7-Fresh src]# cd ominicontacto
[root@CentOS7-Fresh ominicontacto]# git status
# On branch release-1.17.0
nothing to commit, working directory clean
[root@CentOS7-Fresh ominicontacto]# git submodule init
[root@CentOS7-Fresh ominicontacto]# git submodule update --remote
Submodule path 'modules/asterisk': checked out '67d726c6f83849dd40d2323494285f1f0763d87a'
Submodule path 'modules/kamailio': checked out '0617e16b13c35c4eb396510b79d0c6e4188e2355'
Submodule path 'modules/nginx': checked out '59057548651cf6b25d0e3614c0088cf15b90a917'
Submodule path 'modules/postgresql': checked out '1d0e3d511d1551273846be07f599549f6f2d340f'
Submodule path 'modules/redis': checked out '0d8f3296b405bcab4c865db2931fc2b56f55c3bd'
Submodule path 'modules/rtpengine': checked out '62ff79e4f44c474f79026131af10097bb65b6362'
Submodule path 'modules/websockets': checked out 'b6e83f37d164e39ca003528c8abf80d4f53facd0'

4) Edit the inventory file, and execute the deploy.sh script:

[root@CentOS7-Fresh ominicontacto]# cd install/onpremise/deploy/ansible/
[root@CentOS7-Fresh ansible]# vim inventory 
[root@CentOS7-Fresh ansible]# ./deploy.sh -u --iface=ens192

Let me know the results.

Best regards.

FernandoMontiel

Hi @Shant.

Could you solve your installation?

Let us know.

Best regards.

armanguard

Hi FernandoMontiel
please note we solved our update problems with your guides.

best regards

apinales

FernandoMontiel Hi, thank you so much, I had the same problem and following your instructions I was able to solved it.

FernandoMontiel

Hi @apinales!

Glad to hear that!

Thanks for your feedback!

Cheers!